CRT Monitor recycling dismantling Line
CRT Monitor recycling dismantling Line
CRT Monitor recycling dismantling Line is mainly used for waste TV, computer and monitors the dismantling,primarily disassembled into major parts, among which metal parts, plastic parts, CRT and PCB are dismantled directly by intelligent conveying and manual work with our new advanced technology. This is very important in the process of e-waste recycling.
CRT Monitor recycling dismantling Line Features
- Dismantles waste TVs and monitors for recycling with advanced disassembly technology
- Optimal combination of intelligent conveying and manual disassembly
- Low power consumption and high efficiency, up to 100pcs per hour
- Low malfunction rate, low maintenance cost, and extremely long service life
- Can be used with CRT separator and glass washing machine
- Comply with environmental requirements in most countries of use
- NO waste gas, no waste water, no dust pollution
CRT Monitor recycling dismantling Line Composition
TV/Computer Monitor Disassembly Line consists of 9 roller conveyors, 26 cross-ball work table, a lighting set, a pallets loop-back device and 26 pallets.
CRT Monitor recycling dismantling Line Working Flow
At the beginning of the line, the roller conveyor carries TV/Monitor sets to cross ball work tables. Then operators will remove the back cover which is mainly made by plastic and reusable. After that, do the deflection coil disassembly which has copper around it. And then recycle different kinds of metals after disassembled PCB. Above removed parts are collected and classified respectively. Those who need further processing will be sent to next recycling station. And the empty pallets are automatically sent back to the beginning for next-time using through pallets loop-back device.
CRT Monitor recycling dismantling Line Specification
| Size | 26400×3240×2100 mmOr per request | AirPressure | 0.6-0.8Mpa |
| Stations | Number of stations per request | Power | 380v/22.5kw 220v/0.48kwadapttovoltage of all countries |
| Capacity | Depends on number of operators |
CRT Monitor recycling dismantling Line Environmental Compliance
l Compliant with Emission Standard of Air pollutants： GB16297-1996
l Compliant with Noise Control Design of Industrial Enterprises：：GB12348—2008
Dear,
I am an environmental consultant and I intend to acquire equipment for disassembling kinescopes (CRT monitors) for my scrap reprocessing company to be opened in Brazil mid 2018 and, kindly, I would first like to urgently obtain the following information:
1) Sending of folder and manual with the types and approximate values of acquisition for an initial demand of 50 kinescopes per month.
2) What is the maximum noise level that the equipment produces in operation.
3) Which Individual Protection Equipment is suitable for use by 2 operators (technical specifications).
4) What types of environmental monitoring (types of particulates and other contaminants) that I need to monitor.
Thank you so much.
Mário Costa